Ok, so last night I started the process of making a Colette Sorbetto (click to take you to their page). It's a very simple downloadable pattern. It was a lot quicker to stick together than The Mathilde, but that's not surprising as there are only 2 pattern pieces! After a quick stick, I took some measurements and decided on the size I was going to make. I went for a 12 (american size) as it seemed like it would make a spacious summer top, which is very necessary in Hong Kong.
Because the top is so easy to make and doesn't require much fabric, I decided to make a toile. This seemed sensible because I don't have enough of my new fabrics in case anything goes wrong. I decided to use some lovely red poly-cotton that I had left over from a Red Riding Hood fancy dress outfit (i'll leave it at that...). After sewing the centre pleat, darts, side seams and shoulder seams, voila, I had a toile of my Sorbetto. I tried it on straight away as I was very excited that I had just made a top in about 30 minutes!
There were a few simple alterations I noted straight away - The dart was sitting exactly on the bust point, which isn't the most flattering, so I decided to make it 1cm shorter on my paper pattern. In addition to this, there was a slight amount of bagging under the arm and although this should be a fairly baggy top, it just wasn't right. I knew that adding bias binding to finish the top would enhance this. I decided to measure in 0.5cm from the armhole and remove a small triangle from the pattern. Hopefully this will solve the problem. Lastly, the whole thing was just too short. I have this whole long body thing going on, so I wasn't surprised. I decided to add 6cm to the length. I went for this much just in case. I can after all just cut some off if it is too long.
I altered my pattern and am now ready to make my first real Sorbetto. I've decided on another nautical print, but before I can get started I need to do some shopping today.
On my list I have...
- Red, white and matching machine thread to my fabrics.
- White and navy bias binding (if possible).
- 7 x 15mm buttons for my Mathilde.
- Some white invisible zips.
- A new pot of pins.
- A Bias binding maker.
I am going to try Pottinger Street in Central for most of these goodies, I now that I can get most of what I need there. I will then go to Tailoring and Alteration in Causeway Bay to check out their bias binding makers.
Fingers crossed that this is a quick process and I can get home to sew!
